Speed is paramount
Fast-curing Structural Adhesive for Lightweight Construction in Aircraft Interiors
No other industry relies as heavily on lightweight design as aviation does. On the one hand, optimum strength is crucial, on the other hand, weight must be kept to a minimum. DELO has developed a two-component epoxy resin especially for lightweight structural joints in aircraft interiors, focusing on fast build-up of strength.
DELO-DUOPOX AB8162 cures at room temperature, but has been optimized for temperature-accelerated curing. For example, at a temperature of 60 °C, a curing time of only 15 minutes is sufficient to achieve functional strength (>= 10 MPa). Consequently, components can be further processed after this short time, which significantly speeds up production processes.
The adhesive is multi-purpose, including coating or bonding of insert fasteners. With its beige-yellowish color, it has been visually adapted to honeycomb sandwich panels, which are frequently used in the production of aircraft.
DELO-DUOPOX AB8162 ensures consistently high strengths, even under the influence of both temperature and aging, and features excellent resistance to media such as Skydrol, for example. This is a hydraulic fluid that is commonly used in aviation.
Due to the importance of safety, the materials used in aircraft interiors must fulfill high fire protection requirements. These are met by the flame-retardant DELO-DUOPOX AB8162. This product complies with the requirements of FST tests according to CS/FAR Part 25 §25.853 (a)(1)(ii) and those of the Airbus standard ABD0031. FST stands for Flame, Smoke, Toxicity. In these tests, a rod-shaped sample of pure adhesive is held over a Bunsen burner flame for 12 seconds. After this time the adhesive must extinguish itself. It is also required to achieve low flue gas density and a low toxicity level.
DELO-DUOPOX AB8162 is a CMR-free product (non-carcinogenic / non-mutagenic / non-reprotoxic).
The DELO-AUTOMIX dispensing system allows the adhesive to be processed just like a one-component product, with its thixotropic properties ensuring excellent flow behavior. When the shear stress stops at the end of the dispensing process, viscosity will increase again, preventing the adhesive from flowing out.