DELO's LED flood lamps cure adhesives evenly!

Properties

PROPERTIES OF DELOLUX 20 | 202 | 203

DELO's LED flood lamp portfolio

DELOLUX 20 and DELOLUX 202 are UV flood lamps. Distributing light homogeneously, a flood lamp enables curing of larger areas in a matter of seconds.

Our LED flood lights can be adjusted to individual production settings and flexibly integrated into fully automated assembly lines. They are especially suitable for large areas that need consistent illumination for curing: By placing DELOLUX 20 or DELOLUX 202 flood curing lamps in a row, it is possible to bring light evenly to large adhesion surfaces. In-series connection of these LED curing lamps is possible both on the x- and the y-axis.

Another advantage of these flood lamps: Thanks to the cold light source, heat development on the component is very low. In addition, this type of flood lamp shows a very long lifetime and completely even light intensity – for optimal curing results throughout their life cycle.

Suitable for irradiating larger areas
Ideal for fully automated production lines
Cold light source – lowest heat development at the component

Unique features

Lifetime exceeding 20,000 hours
Consistent light intensity throughout the flood lamp's lifetime
Irradiation area can be expanded on the x- and y-axis
Very even distribution of light even on large areas
Same base unit for both types of lamp heads

Brochures of DELOLUX 20 | 202 | 203

LED curing lamps

Light curing

Benefits, adhesives and curing lamps

Technical data

Model	DELOLUX 20	DELOLUX 202	DELOLUX 203
Dimensions of lamp head	A1 / A2*: 112 × 112 × 121 mm A4: 112 x 112 x 180 mm	209 × 67 x 121 mm	112 x 112 x 121 mm
Light exit area	100 x 100 mm	202 x 49 mm	100 x 100 mm
Wavelengths / Intensities (typical)	365 nm (A1): ≥ 600 mW / cm² 365 nm (A2): ≥ 1,200 mW / cm² 365 nm (A4): ≥ 2,400 mW / cm² 400 nm (A1): ≥ 1,000 mW / cm² 400 nm (A2): ≥ 2,000 mW / cm² 400 nm (A4): ≥ 4,000 mW / cm² 460 nm (A1): ≥ 1,000 mW / cm² 460 nm (A2): ≥ 2,000 mW / cm² Lamp head with mixed wavelengths 365 nm & 400 nm (A4): ≥ 1,200 mW / cm² (365 nm); ≥ 2,000 mW / cm² (400 nm)	365 nm (A1): ≥ 600 mW / cm² 365 nm (A2): ≥ 1,200 mW / cm² 400 nm (A1): ≥ 1,000 mW / cm² 400 nm (A2): ≥ 2,000 mW / cm² 460 nm (A1): ≥ 1,000 mW / cm² 460 nm (A2): ≥ 2,000 mW / cm²	365 nm (A1): ≥ 600 mW / cm² 365 nm (A2): ≥ 1,200 mW / cm²
Cooling mechanism	Active air cooling	Active air cooling	Via external cooling profile (liquid or passive)
Control	DELOLUX pilot	DELOLUX pilot	DELOLUX pilot

*A = Area lamp
1 = Number of lamp outputs required on the DELOLUX pilot control unit

Downloads

THE FOLLOWING PRODUCTS COULD BE INTERESTING

Adhesives

LED lamps

Dispensing valves and systems

Excellent bonding results – Thanks to DELO's state-of-the-art adhesives

For more than 50 years, DELO has been convincing customers with its adhesion solutions: Whenever reliable, durable and fast-curing bonds are necessary, DELO glues report for duty!

The application fields and possibilities of use are highly diverse and the industries range from microelectronics, electronics, RFID, automotive and photovoltaics to mechanical engineering. If you are looking for a bonding solution for your components, then ask for details of our products, and benefit from expert advice on adhesives. From cyanoacrylate and epoxy resin adhesives to silicones, DELO is guaranteed to have the right adhesive for you.

LED curing lamps for quick adhesive curing processes

Speed is often the focus when it comes to using adhesives. UV curing lamps enable fast curing and are therefore often indispensable in the production process.

UV LED lamps offer technical properties that deliver significant advantages for adhesive curing:

Light intensity adjustable to a constant high level
Useful life can exceed 20,000 hours (“on” time = lifetime)
Low operating costs through low current consumption and low costs for maintenance and spare parts
No warm-up time and therefore ready for operation immediately
Reproducible curing properties on the entire irradiated area
Very low heat development at the component
Compact design

DELO dispensing equipment for precise adhesive dispensing

Adhesive, application and desired degree of automation – these factors are decisive for the selection of suitable dispensing equipment, such as dispensing guns, valves and pressure tanks.

DELO’s adhesive dispensing equipment is precisely adapted to its high-tech adhesives and enables optimum production processes. You benefit from cost-effective adhesive processing that can be integrated into the process flexibly. Jet systems, in particular, must operate precisely and fast, and must be compact. Precision is necessary for the accurate and reproducible application of tiny adhesive quantities; speed enables fast processes, while a compact design allows integration into any production system.

Do you need assistance with your application?

Our experts will be pleased to offer advice and assistance.

Quotations, ordering	Technical consulting, sample and data sheet inquiries
+49 8193 9900 - 9610	+49 8193 9900 - 9611

Do you have questions about a specific application? If so, please use our project form.
The more detailed the description, the faster you will receive your optimum product sample.

QUICK REQUEST

Project inquiry

DELOLUX 20 | 202 | 203

PROPERTIES OF DELOLUX 20 | 202 | 203

Unique features

Brochures of DELOLUX 20 | 202 | 203

DELOLUXcontrol

DELOLUX 50 | 502 | 503 | 504

DELOLUX pilot | series

DELOLUX 80

THE FOLLOWING PRODUCTS COULD BE INTERESTING

Excellent bonding results – Thanks to DELO's state-of-the-art adhesives

LED curing lamps for quick adhesive curing processes

DELO dispensing equipment for precise adhesive dispensing

Do you need assistance with your application?

Any questions?

DELOLUX 20 | 202 | 203

PROPERTIES OF DELOLUX 20 | 202 | 203

Unique features

Brochures of DELOLUX 20 | 202 | 203

The following products could be interesting

DELOLUXcontrol

DELOLUX 50 | 502 | 503 | 504

DELOLUX pilot | series

DELOLUX 80

Excellent bonding results – Thanks to DELO's state-of-the-art adhesives

LED curing lamps for quick adhesive curing processes

DELO dispensing equipment for precise adhesive dispensing

Do you need assistance with your application?

Receive the marked data sheets and safety data sheets by e-mail

Any questions?