PROPERTIES OF DELOLUX 301
Highest power and flexibility in adhesive curing
LED line lamp for especially intensive curing processes of adhesives in the production of small electronic components. DELOLUX 301 is suitable for highly automated processes in small and narrow production lines. The lamp thus offers the highest curing speeds and great flexibility for integration into production systems.
Thanks to its very high intensity of up to 30 W/cm², it enables the highest speeds in the curing of light-curing adhesives. High intensities at small working distances, on the other hand, allow great flexibility at large working distances of up to 100 mm, still with sufficiently high intensities for the curing of DELO adhesives. The lamp’s compact head dimensions, measuring 42.7 mm x 13 mm x 67.2 mm, contribute to a high degree of flexibility for integration into production systems as well.
The lamp head produces a linear irradiated area of 38.7 mm x 8.45 mm. The DELOLUX 301 can be operated as a single head or seamlessly combined to form a larger array. As the lamp heads can be lined up seamlessly in at least three directions, customized – yet homogeneous – irradiation areas can be implemented. The LED lamp can thus be perfectly adapted to customer-specific production conditions and flexibly integrated into fully automated production lines.
DELOLUX 301 is suitable for clean rooms as standard. The lamp head can be used passively or water-cooled, depending on the process. Due to the high intensity involved, we recommend water cooling and offer a suitable cooling profile for the lamp head for this purpose – if not already available in your system.
The lamp is available with wavelengths of 365 nm and 400 nm or, optionally, 460 nm. DELOLUX 301 is therefore ideal for UV- and light-curing adhesives from DELO, such as DELO PHOTOBOND and DELO KATIOBOND. Their achievable useful life is more than 20,000 hours. The lamp heads can be replaced quickly and easily on the DELOLUX pilot control units via plug-and-play.
Benefits at a glance:
- Shortest cycle times thanks to the highest intensities
- Flexible process thanks to the largest possible working distances
- Long useful life of the lamp heads of more than 20,000 hours
- Consulting and customer-specific solutions from a single source: high-tech adhesives, dispensing systems, and curing lamps
Brochures of DELOLUX 301
Excellent bonding results – Thanks to DELO's state-of-the-art adhesives
For more than 50 years, DELO has been convincing customers with its adhesion solutions: Whenever reliable, durable and fast-curing bonds are necessary, DELO glues report for duty!
The application fields and possibilities of use are highly diverse and the industries range from microelectronics, electronics, RFID, automotive and photovoltaics to mechanical engineering. If you are looking for a bonding solution for your components, then ask for details of our products, and benefit from expert advice on adhesives. From cyanoacrylate and epoxy resin adhesives to silicones, DELO is guaranteed to have the right adhesive for you.
LED curing lamps for quick adhesive curing processes
Speed is often the focus when it comes to using adhesives. UV curing lamps enable fast curing and are therefore often indispensable in the production process.
UV LED lamps offer technical properties that deliver significant advantages for adhesive curing:
- Light intensity adjustable to a constant high level
- Useful life can exceed 20,000 hours (“on” time = lifetime)
- Low operating costs through low current consumption and low costs for maintenance and spare parts
- No warm-up time and therefore ready for operation immediately
- Reproducible curing properties on the entire irradiated area
- Very low heat development at the component
- Compact design
DELO dispensing equipment for precise adhesive dispensing
Adhesive, application and desired degree of automation – these factors are decisive for the selection of suitable dispensing equipment, such as dispensing guns, valves and pressure tanks.
DELO’s adhesive dispensing equipment is precisely adapted to its high-tech adhesives and enables optimum production processes. You benefit from cost-effective adhesive processing that can be integrated into the process flexibly. Jet systems, in particular, must operate precisely and fast, and must be compact. Precision is necessary for the accurate and reproducible application of tiny adhesive quantities; speed enables fast processes, while a compact design allows integration into any production system.
Do you need assistance with your application?
Our experts will be pleased to offer advice and assistance.
|Quotations, ordering||Technical consulting, sample and data sheet inquiries|
|+49 8193 9900 - 9610||+49 8193 9900 - 9611|
Do you have questions about a specific application? If so, please use our project form.
The more detailed the description, the faster you will receive your optimum product sample.