DELO Academy Webinars

A digital knowledge package

Bonding is a complex joining method. Solving bonding challenges successfully requires a good understanding of the basics and specifics of this technology. Build up valuable knowledge with the help of our "TECH TALKS" webinars!

In impulse presentations, our adhesives experts will share knowledge on topics such as correct surface pretreatment or very fast production processes. Afterwards in each TECH TALK you will have the opportunity to ask our experts your specific questions get helpful tips for your projects.

All webinars are organized by the DELO Academy and are free of charge. Simply participate from the comfort of your workplace - whether at home or in the office. We are looking forward to an exciting exchange with you!

Language

  • English
  • German
  • Chinese

March / May 2021 | Online TECH TALK
Bonded Connections in Construction: Design Guidelines for Adhesive Bonding 

Designers and process designers need the Right knowledge about adhesives to enable them to achieve the desired quality of their end products. In this TECH TALK the basics for the design of an adhesive seam or potting should be laid down. 

Get answers to questions like: 

  • What effect does the gap thickness have on the strength and stiffness of a structure?
  • What does an optimal construction for a potting look like?
  • Why does my adhesive bond fail when I have taken my construction from the welded joint?

Any further questions? Ask them in the webinar!

March 09th, 2021
09.00 am - 09.45 am (CET)
Language: English

May 11th, 2021
11.00 am - 11.45 am (CET)
Language: English


March 2021 | Online TECH TALKS
Better than Tapes: Liquid Pressure Sensitive Adhesives

Liquid pressure sensitive adhesives (PSA) combine the unique properties of pressure sensitive tapes with the easy and automatable processability of liquid adhesives. Thanks to the designed tacky surface after irradiation, components can be joined by moderate pressure application with an immediate initail bond strength which allows direct handling of parts without clamping - ideal for processes with high UHP. In this TECH TALK, this new Kind of adhesives is introduced. 

Get an answer to questions like:

  • What are process benefits of liquid PSA?
  • Where is the difference between Acrylate- and Epoxy-based liquid PSA?
  • What are typical applications?

We will be pleased to answer your specific questions during the webinar as well!

March 11th, 2021
09.00 am - 09.45 am (CET)
Language: English


March 2021 | Online TECH TALKS
Casting of Electronics: Optimizing Product Quality through Design, Adhesive and Process Selection

In order to achieve high product quality and a smooth production process, the adhesive and process technology must be coordinated. Learn more about basic relationships that need to be taken into account when casting components . 

Get an answer to questions like:

  • What influence does the component geometry have on the choice of casting compound?
  • What contribution can FEM simulations make to adhesive selection?
  • How do you avoid air bubbles in the casting process?

We will be pleased to answer your specific questions during the webinar as well!

March 18th, 2021
05.00 pm - 05.45 pm (CET)
Language: German


March 2021 | Online TECH TALK
Media storage as stress test for adhesive and bonded joints

This webinar will present common media form various industries and highlight their impact on adhesives and bonded joints. 

You will get an answer to questions like:

  • What ist the purpose of material testing with media contact?
  • What types of media are there?
  • How do media affect the mechanical properties of adhesives and what test approaches are available for this?

Any further questions? Ask them in the webinar!

March 25th, 2021
09.00 am - 09.45 am (CET)
Language: German


DELO Online Tech Talks

March / May 2021 | Online TECH TALKS
Basic of Bonding Technology

In the webinar, the DELO experts will provide you with basics knowledge of bonding technology and show you which factors need to be considered for the successful implementation of bonding processes. You can also learn about the advantages of using high-tech adhesives for different applications.

You will get an answer to questions like:

  • For which applications is bonding suitable? What are the limits?
  • Why is the image of failure in adhesive helpful in the adhesive selection?
  • What is the optimum layer thickness of adhesives?

Please feel free to answer your specific questions!

March 30th, 2021
09.00 am - 09.45 am (CET)
Language: German

May 20th, 2021
03.00 pm - 03.45 pm (CET)
Language: English


DELO Online Tech Talks

April / June 2021 | Online TECH TALKS
Surface Pretreatment

In this webinar, we will show process options prior to the actual bonding process. Our experts will give you an overview of various pretreatment methods and show you which methods are available for quality assurance.

You will get an answer to questions like:

  • What are the effects of surface pretreatment?
  • Do all components have to be pretreated before bonding?
  • How can a reproducible quality of the bonded joint be achieved?

Any further questions? Ask them!

April 01st, 2021
05.00 pm - 05.45 pm (CET)
Language: English

June 08th, 2021
09.00 am - 09.45 am (CET)
Language: English


DELO Tech Talk

April / June 2021 | Online TECH TALK
Dispensing 100 times faster: Screen & Stencil Printing of Adhesives. 10 Questions and Answers

Screen and stencil printing can speed up conventional dispensing processes by 100 times. In this TECH TALK you will learn the basic operation and possible applications of screen and stencil printing for adhesives. 

You will get an answer to questions like:

  • Which geometries / structures can be imaged?
  • What are the advantages of a stencil and those of a screen? 
  • How can bubbles in the printed image be avoid? 

Enrich the TECH TALK with your auestions!

April 08th, 2021
11:00 am - 11.45 am (CET)
Language: German

June 29th, 2021
05.00 pm - 05.45 pm (CET)
Language: English


DELO Online Tech Talk

April / June 2021 | Online TECH TALKS
Fast Processes: Bonding in Seconds

Fast and efficient processes offer a considerable competitive edge. Combined with expertly applied knowledge, high-tech adhesives can help accelerate production processes. This TECH TALK will show you exactly how this can look like.

You will get an answer to questions like:

  • Can light-curing adhesives be used to bond components that are not translucent?
  • Are there adhesives that have multiple curing mechanisms?
  • Can the curing speed of heat-curing adhesives be increased?What is the minimum curing time of adhesives?

Enrich the TECH TALK with your additional questions!

April 15th, 2020
11.00 am - 11.45 am (CET)
Language: German

June 17th, 2021
09.00 am - 09.45 am (CET)
Language: English


April 2021 | Online TECH TALK
Pretreatment possibilities for plastic and their quality assurance

Plastics often cannot be bonded without pretreatment, e.g. due to low-energy surfaces. Pretreatment can´t only improve the adhesion but also the aging resistance and reproducibility of the bonding. In this TECH TALK, together with an expert from SKZ in Würzburg, we want to introduce you to possilibities for pretreatment and its quality assuarance in the production process.

Get an answer to questions like: 

  • What is wetting and how can I achieve it even on low-energy surfaces?
  • What effects do pretreatments have on plastic surfaces?
  • How do different pretreatment options differ - what are selection factors?
  • How can I ensure proper pretreatment in production?

Take the opportunity to put your individual questions to experts from the institute and adhesive manufacturers.

April 22th, 2021
11.00 am - 11.45 am (CET)
Language: German


Online Tech Talks

April / June 2021 | Online TECH TALK
Dispensing Technology - Fast and Precise Adhesive Application

Users can choose from a wide selection of dispensers for bonding processes. This free webinar provides a brief overview of the various dispensing technologies and focuses on contactless jetting, which is the fastest dispensing option.

You will get an answer to questions like:

  • Which valve types are available on the market and how to choose the correct one?
  • Which equipment components in the process have a significant role in the whole dispensing process?
  • How do other parameters like “tube length” affect the dispensing?

Any further questions? Ask them in the webinar!

April 27th, 2021
09.00 am - 09.45 am (CET)
Language: German

June 22th, 2021
05.00 pm - 05.45 pm (CET)
Language: English


Online Tech Talk

May 2021 | Online TECH TALK
Six engineering tips to improve your UV curing process

In this webinar, you will learn everything about possible UV curing solutions, and which parameters should be controlled for a successful process. Learn more about how to improve reliability and quality assurance in your day-to-day business by taking advantage of practical tips.

You will get an answer to questions like:

  • Which machine parameter should be monitored for quality assurance?
  • How to choose the correct curing lamp for an adhesive?
  • How does the wavelength and intensity of a UV lamp affect the curing degree?

Any further questions? Ask them in the webinar!

May 06th, 2021
03.00 pm - 03.45 pm (CET)
Language: German


DELO Tech Talk

May 2021 | Online TECH TALKS
New adhesives in e-motors: Bond strengths of more than 20MPa at +180 °C

New high temperature resistant development for e-mobility: Within the new electronic motors, especially for traction motors in the automotive business, the requirements for the adhesive bonding strength gets higher and higher. Our new high temperature based products show huge strength at high temperatures (more than 20 MPa at +180°C!) and can be also combined for fast assembly processes and further special requirements. Learn more about this special development with detailed application examples in e-motors (e.g. magnet bonding).

Get an answer to questions like:

  • Which properties do high temperature adhesive have and which advantages in comparison to standard products?
  • How fast processes can be achieved with these products?
  • Which application areas can be solved with high temperature adhesives?

We will be pleased to answer your specific questions during the webinar as well!

May 18th, 2021
05.00 pm - 05.45 pm (CET)
Language: English

May 25th, 2021
09.00 am - 09.45 am (CET)
Language: English


May / September 2020 | Online TECH TALK
LED lamps vs. discharge lamps

Many processes need visible / UV-light, to cure the used materials fast and reliable. Often the arises, which technology is the right one for my process. In this webinar we will show you the general differences between LED and discharge lamps in the industrial field of application. 

You will get answers on following questions:

  • How have the technologies developed at DELO / in the market?
  • What are the advantages and disadvantages of each technology?
  • Why the LED technology is and remains the future? (A TCO calculation will be presented)

Enrich the TECH TALK with your questions!

May 27th, 2021
09:00 am - 09.45 am (CET)
Language: English

September 21st, 2021
06.00 pm - 06.45 pm (CET)
Language: English


Use the DELO TECH TALK to build up knowledge, deepen your expertise and exchange information with our adhesives experts! We are looking forward to providing you with answers to your specific questions and supporting you in your bonding challenges.

Our experts will also be pleased to share their knowledge with you at external conferences. In addition, we offer individual courses tailored to our needs - either in your company or at DELO in Windach. Just talk to us!

DELO Academy Team

Need further information?

The DELO Academy will be pleased to answer your questions:


Need further information?
The DELO Academy will be pleased to answer your questions.