Dispensing

DELO-DOT RE

Drip-free dispensing for minimum adhesive quantities

The DELO-DOT RE pneumatic retraction valve strikes the balance between the repeatability and control of high-quality volumetric or jetting systems and the simple, direct dispensing of cartridges. After dispensing, the needle retracts to reverse adhesive flow. The resulting vacuum effect prevents dripping.

Optimal integration Dispensing of small volume

DELO-DOT RE

Pneumatic retraction valve

Bubble- and drip-free dispensing

Good reasons why you should choose the DELO-DOT RE for the highest quality:

  • Precise Dispensing: Bubble-free dispensing of liquids at volumes as low as 0.09 µl
  • Process Accuracy: Maximum reproducible dispensing accuracy of up to 97%
  • Retraction Effect: Prevents dripping
  • Customer-Tailored Solutions: One-stop shop for high-tech adhesives, dispensing systems, and UV lamps
  • Consulting Services: Our experts help to find a solution tailored to your requirements

The right product for your application

Find out which product is best suited for which application.

Compact & High-Quality

DELO-DOT RE

The valve dispenses adhesives bubble-free, at volumes as low as 0.09 µl with a standard deviation of less than 3%. This almost corresponds to the dosing consistency of high-quality jet valves. Therefore, it is capable of dispensing at significantly lower quantities than direct cartridge dispensing.

Thanks to its small size and weight of just over 50 grams, DELO-DOT RE can be easily integrated into almost any production line. Its actuator and fluid system are separate, so that the valve does not have to be removed from the system when changing. In addition, the fluidics can be changed without tools, making assembly and disassembly easy.

The retraction valve is ideal for applications in semiconductor and camera production due to its described properties.

Want to know more about a specific product familiy? Get in touch with us:  
 

Request a Consulting

Dispensing

Pneumatic retraction valve

With vacuum effect for high precision and reproducibility

DELO-DOT RE retraction valve is widely used across industries for smooth, reliable adhesive application. Key areas include: 

  • Active alignment: During active alignment for automotive cameras, DELO-DOT RE enables the continuous application of adhesive beads with no bubble formation or dripping
  • Lid attach for advanced packaging: The retraction valve delivers a consistent adhesive layer thickness, minimal tilting and ensures seamless transitions at the start and end points of the lid attach process
  • Pin sealing in automotive applications: Achieving a uniform adhesive layer thickness without bubbles or dripping is essential in pin sealing to prevent humidity-related issues

DELO-DOT RE

DELO-DOT RE
Pneumatic retraction valve

Technical data

Small valve, big impact
DELO-DOT RE
Drive Pneumatic
Dimensions 25 mm × 33 mm × 112 mm
Volume flow 0 – 2.9 l/min
Viscosity up to 500,000 mPas (thixotropic)
Operating pressure 2 – 6 bar
Nozzle connection Luer-Lock DIN EN 1707
Dispensing speed max. 30 Hz
Min. dispensing volume 0.092 µl
Dispensing fluctuations min. 1-3 %
Weight 51 g
Product compatibility DELOMAT 101

Downloads

Further information on the products can be found in the related download files.

Factsheets (all products)

Technical Data Sheets |

Safety Data Sheets |

Instructions for use