The adhesive features increased strength for this area of application. With 16 MPa on aluminum at a temperature of 80 °C, for example, it offers double tensile shear strength compared to standard 2C epoxy resins. In addition, its temperature stability allows for low aging rates. Bond strength remains the same, even after 1,000 hours being stored at 85 °C with 85 % humidity.
This tough-hard adhesive of medium viscosity is particularly well suited for surface magnets which are subjected to sudden loads. Furthermore, it can be used for buried magnets and for fixing the stator to the housing. Industrial sieves which are constantly exposed to high temperatures represent another possible field of application.
Fast and flexible production possible
Even though 2C epoxy resins cure at room temperature, it is possible to accelerate this process by heat. In the case of the new epoxy resin, it easily cures at varying times and temperatures, helping make the production process as fast and flexible as possible. Functional strength is achieved within five minutes, with full curing within 10 minutes, both at 80°C. When induction cured at 100°C, DELO-DUOPOX SJ8665 reaches a strength of 10 MPa within one minute. With final curing of the adhesive done at room temperature, this makes it possible to directly continue the production process.
In contrast to one-component products, which need higher curing temperatures of 130°C or more, DELO-DUOPOX SJ8665 is also used when bonding temperature-sensitive materials like plastics and magnetized metals. Because it can be cured at 80°C, less time is needed to heat components which allows for faster assembly and a lower demand on energy.